You are currently visiting the SSAB group site

To go to your country specific site please follow this link:

Energy efficiency

Energy efficiency in steel production is a key priority for SSAB. We view it as an opportunity to reduce costs and improve SSAB’s environmental footprint. SSAB improves energy efficiency in its steel production by using process gases and recovered heat to reduce the need for purchased energy, both fuels and electricity.

Energy recycling in blast furnace steel production

To improve energy efficiency, energy flows are recycled in the production process (see illustration). Gases, steam and hot water produced in the processes are recovered and utilized in other parts of the process to generate electricity and heat.



Production processes that produces energy

In conjunction with the process where iron ore is reduced to hot metal, energy rich process gases are released. These gases are utilized in SSAB’s steel production. In the blast furnace, the oxygen bound in the iron ore is converted to CO and CO2 through a reaction with the carbon in the coke and coal powder. As its name implies, blast furnace gas (BFG) originates in the blast furnace. It is a gas mixture containing mostly carbon monoxide and carbon dioxide from the reduction process. Although the gas has a low heat value, given the large volume it still contains a considerable amount of energy that can be utilized through either combustion through own processes, where the energy content is used for coke or pig iron production, or in a combined heat and power plant, where the energy content is converted to electricity and heat. The electricity is used in SSAB’s production processes, while the majority of the heat is supplied to the local district heat network.

SSAB produces coke through dry distillation of coal in coking plants. Heating the coal in the coking plant, releases energy rich gases that mainly consist of hydrogen and carbon monoxide. The coke oven gases released are used in the production process instead of sourced fuels such as natural gas, LPG or oil. The LD process also gives rise to energy rich gases that consist mainly of carbon monoxide. LD gases (BOFG) are mixed with the blast furnace gas before combustion in the power plant. The combined heat and power plants at SSAB’s production sites in Sweden and Finland produce 40% of SSAB’s electricity requirement in the Nordics, as well as supplying the district heat networks in Luleå, Oxelösund and Raahe with heat.


Energy usage at SSAB

Apart from the energy-rich process gases that are recirculated as electricity and heat in SSAB’s steel production, purchased fuels such as natural gas, LPG and oil are also used in the steel production process. Purchased fuels are used to heat up the steel in the hot-rolling process and after treatment, as well as being a supporting fuel in the power plant. In order to maximize energy efficiency, priority is always given to utilizing process gases rather than purchased fuels. To maximize the energy efficiency, heat is recovered from waste gases and machinery; the heat is used internally to reduce the need for purchased energy, or used for district heating.

Fuel usage

In 2016, SSAB used 4.45 TWh of purchased fuels in its global operations. Of these purchased fuels, natural gas accounted for 69%, LPG for 25% and oil for 6%.

SSAB Purchased fuels 2016

Electricity usage

In 2016, SSAB used 4.51 TWh of electricity in its global operations of which 26% was produced internally. In the Nordics, 2.73 TWh was used, of which 42% was produced internally.

SSAB Electricity usage 2016

SSAB Electricity usage Nordics 2016

Electricity from renewable energy sources

SSAB’s aim is for a significant share of the electricity it buys from external supplies to come from renewable energy sources. Consequently, SSAB decided in the spring of 2015 to buy ”guarantees of origin” (GoO) regarding renewable energy for the share of energy it buys externally in the Nordic countries. The guarantees of origin means that at least 50% of the electricity SSAB buys on the Nordic electricity market is derived from renewable energies of which a minimum of 30% is hydroelectricity and a minimum of 20% is wind power.

SSAB’s target to reduce the amount of purchased energy

SSAB has a target to reduce the amount of purchased energy, both electricity and fuels. The target is to achieve a lasting reduction of 300 GWh in purchased energy by the end of 2019, compared to the 2014 baseline.

Read more about SSAB´s sustainability targets

Use of process gases in combined heat and power plants

The chart illustrates the use of process gases to make electricity and heat in the combined heat and power plants.

SSAB Fuel and energy 2016

Energy efficiency in practice

Energy efficiency applies to the whole production chain and the need for purchased fuels is reduced by optimizing which process gases can be utilized for which processes. Additionally, the production of electricity and heat is maximized in terms of heat value and volume by optimizing the supply of process gases to the power plant. The most fundamental part of improving energy efficiency is to constantly question if energy usage is optimized, as well as analyzing the actual need in different processes (shutdowns, different production levels, etc.). Below are some examples of activities to improve efficiency, based on experiences from SSAB’s operations and split into optimization, productivity, use and maintenance.


  • Reduced output pressure in media system (compressed air, etc.)
  • Cooling water, adjust output pressure according to need due to inlet temperature
  • Optimize pump groups (3 running instead of 4, etc.) to run on optimum operation point (cooling water, hydraulic system, etc.)
  • Furnaces, short stops (10 min to 8 h) manual ramp-down and control
  • Furnaces, long stops (>8 h), manual set-point for lower temperature
  • Furnaces, analyze oxygen level in flue gasses, optimize burners
  • Routines to stop equipment not needed when production is shut down


  • Increase yield
  • Hot charging of reheating furnaces


  • Routines to shut down equipment during maintenance, disruption, etc.
  • Switch to optimized lighting source
  • Customize lighting after need, presence-controlled, etc.


  • Leakage control in media system (compressed air, water, air, gases, etc.)
  • Analyze efficiency on pumps, fans, compressors, etc. Change equipment if efficiency is poor due to high wear or wrong sizing
  • Analyze efficiency on control valves, change if performance is poor due to high wear or wrong sizing