Product & services Brands & products Armox Product offer and datasheets Armox Armox 440T

Armox® 440T

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

Please visit SSAB’s privacy statement for more information on how we process personal data
On this page

    General Product Description

    Blast protection plate.

    Armox® 440T combines excellent penetration and shock resistance. It offers vehicle designers new ways to increase protection using lighter weight designs.

    Benefits of using Armox® 440T include: 

    • Superior workshop properties
    • Optimized solutions
    • Perfect hardness/toughness balance, for combined penetration and blast protection
    • Expertise in ballistic protection from SSAB

    Armox® 440T is not intended for further heat treatment.

    Mechanical Properties

    Hide/Show specific columns Edit
    Select columns to display
      Thickness
      (mmin)      		 Hardness
      (HBW)      		 Yield strength Rp0.2
      (min MPaksi)      		 Tensile strength Rm
      (MPaksi)      		 Elongation A5
      (min %)      		 Elongation A50
      (min %)
      4.0 - 30.00.157 - 1.1810 420 - 480 1100159 1250 - 1550181 - 224 10 12
      30.1 - 50.01.185 - 1.968 420 - 480 1050152 1250 - 1550181 - 224 10 12
      50.1 - 80.01.972 - 3.150 420 - 480 1000145 1250 - 1550181 - 224 10 12
      Compare parameters

      Select one parameter to compare

      Comparison

         

        Mechanical Testing

        Brinell hardness test according to EN ISO 6506-1 on each heat treatment individual.

        Charpy impact test according to EN ISO 148 on each heat and thickness from 6 mm.

        Tensile test according to EN ISO 6892 on each heat and thickness. 

        Ultrasonic testing

        According to EN 10160 Class E3S3.

        Impact Properties

        Hide/Show specific columns Edit
        Select columns to display
          Thickness
          (mmin)          		 Min impact energy for transversal testing,
          Charpy V 10x10 mm test specimen 1)
          4.0 - 80.00.157 - 3.150 45 J / -40 °C33 ft-lbs / -40 °F
          Compare parameters

          Select one parameter to compare

          Comparison

            Thickness
            (mmin)
            4.0 - 80.00.157 - 3.150
            Min impact energy for transversal testing,
            Charpy V 10x10 mm test specimen 1)
            45 J / -40 °C33 ft-lbs / -40 °F

            1) Average of three tests. Transverse to rolling direction. Single value min. 70% of specified average. For plate thicknesses under 12 mm sub-size Charpy-V specimen are used. The specified minimum value is then propotional to the specimen cross-section.

            Chemical Composition (ladle analysis)

            Hide/Show specific columns Edit
            Select columns to display
              C *)
              (max %)              		 Si *)
              (max %)              		 Mn*)
              (max %)              		 P
              (max %)              		 S
              (max %)              		 Cr*)
              (max %)              		 Ni*)
              (max %)              		 Mo*)
              (max %)              		 B*)
              (max %)
              0.21 0.50 1.20 0.010 0.003 1.0 2.50 0.70 0.005
              Compare parameters

              Select one parameter to compare

              Comparison

                The steel is grain-refined. *) Intentional alloying elements.

                Tolerances

                More details are given in SSAB´s brochure Armox® Guarantees or on www.ssab.com.

                Thickness

                Tolerances according to Armox® Thickness Guarantees.

                Armox® Guarantees meet the requirements of EN 10029 Class C, but offers narrower tolerances.

                Length and Width

                Tolerances conform to EN 10029 or to SSAB´s standard after agreement.

                Dimensional tolerances for plate with mill edge according to special agreement. 

                Shape

                Tolerances according to EN 10029.

                Flatness

                Tolerances according to Armox® flatness guarantees, which are more restrictive than EN 10029 Class N (steel type L).

                Surface Properties

                According to EN 10163-2 Class B, Subclass 3.

                Delivery Conditions

                The delivery condition is QT (Quenched and Tempered).

                Delivery requirements can be found in SSAB’s brochure Armox® Guarantees or www.ssab.com.