Docol® Tube 420LA

General Product Description

Docol® Tube 420LA is high-strength formable precision tube. Available in circular, rectangular and square shapes, it comes with different coating and surface options including cold rolled, hot rolled pickled, galvanized, galvannealed and galfan. Customized shapes and other tailoring options are available upon request. Typical uses include automotive and light engineering, where durability, formability and weldability are important.

Dimension Range

Docol Tube 420LA is available in circular, square and rectangular shapes.

Hide/Show specific columns Edit

Select columns to display

Shapes	Dimensions
Circular (mmin)	16 - 88.90.63 - 3.50
Square (mmin)	19x19 - 60x60
Rectangular (mmin)	25x15 - 100x40
Wall thickness (mmin)	1.0 - 3.00.039 - 0.12
Mill length (mm)	6000

Compare parameters

Select one parameter to compare

Dimensions

Shapes

Circular (mmin)

Dimensions

16 - 88.90.63 - 3.50

Shapes

Square (mmin)

Dimensions

19x19 - 60x60

Shapes

Rectangular (mmin)

Dimensions

25x15 - 100x40

Shapes

Wall thickness (mmin)

Dimensions

1.0 - 3.00.039 - 0.12

Shapes

Mill length (mm)

Dimensions

6000

Other shapes, sizes and lengths are available upon request.

Circular Dimensions

Hide/Show specific columns Edit

Select columns to display

Outer diameter (mmin)	1.0 mm (kg/m)	1.25 mm (kg/m)	1.5 mm (kg/m)	2.0 mm (kg/m)	2.5 mm (kg/m)	3.0 mm (kg/m)
160.63	0.370	0.455	0.536	—	—	—
180.71	0.419	0.516	0.610	—	—	—
190.75	0.444	0.547	0.647	—	—	—
200.79	0.469	0.578	0.684	—	—	—
220.87	0.518	0.640	0.758	—	—	—
250.98	0.592	0.732	0.869	1.13	—	—
281.1	0.666	0.825	0.980	1.28	1.57	1.85
301.2	0.715	0.886	1.05	1.38	1.70	2.00
321.3	0.765	0.948	1.13	1.48	1.82	2.15
351.4	0.838	1.04	1.24	1.63	2.00	2.37
381.5	0.912	1.13	1.35	1.78	2.19	2.59
411.6	0.990	1.22	1.46	1.92	2.37	2.81
44.51.75	1.07	1.33	1.59	2.10	2.59	3.07
481.9	—	1.44	1.72	2.27	2.81	3.33
502.0	—	—	1.79	2.37	2.93	3.48
552.2	—	—	1.98	2.61	3.24	3.85
572.2	—	—	2.05	2.71	3.36	4.00
602.4	—	—	2.16	2.86	3.55	4.22
76.13.00	—	—	2.76	3.65	4.54	5.41
88.93.50	—	—	—	4.29	5.33	6.36

Compare parameters

Select one parameter to compare

1.0 mm (kg/m)

1.25 mm (kg/m)

1.5 mm (kg/m)

2.0 mm (kg/m)

2.5 mm (kg/m)

3.0 mm (kg/m)

Outer diameter (mmin)

160.63

1.0 mm (kg/m)

0.370

1.25 mm (kg/m)

0.455

1.5 mm (kg/m)

0.536

2.0 mm (kg/m)

—

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Outer diameter (mmin)

180.71

1.0 mm (kg/m)

0.419

1.25 mm (kg/m)

0.516

1.5 mm (kg/m)

0.610

2.0 mm (kg/m)

—

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Outer diameter (mmin)

190.75

1.0 mm (kg/m)

0.444

1.25 mm (kg/m)

0.547

1.5 mm (kg/m)

0.647

2.0 mm (kg/m)

—

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Outer diameter (mmin)

200.79

1.0 mm (kg/m)

0.469

1.25 mm (kg/m)

0.578

1.5 mm (kg/m)

0.684

2.0 mm (kg/m)

—

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Outer diameter (mmin)

220.87

1.0 mm (kg/m)

0.518

1.25 mm (kg/m)

0.640

1.5 mm (kg/m)

0.758

2.0 mm (kg/m)

—

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Outer diameter (mmin)

250.98

1.0 mm (kg/m)

0.592

1.25 mm (kg/m)

0.732

1.5 mm (kg/m)

0.869

2.0 mm (kg/m)

1.13

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Outer diameter (mmin)

281.1

1.0 mm (kg/m)

0.666

1.25 mm (kg/m)

0.825

1.5 mm (kg/m)

0.980

2.0 mm (kg/m)

1.28

2.5 mm (kg/m)

1.57

3.0 mm (kg/m)

1.85

Expand Collapse

Outer diameter (mmin)

301.2

1.0 mm (kg/m)

0.715

1.25 mm (kg/m)

0.886

1.5 mm (kg/m)

1.05

2.0 mm (kg/m)

1.38

2.5 mm (kg/m)

1.70

3.0 mm (kg/m)

2.00

Expand Collapse

Outer diameter (mmin)

321.3

1.0 mm (kg/m)

0.765

1.25 mm (kg/m)

0.948

1.5 mm (kg/m)

1.13

2.0 mm (kg/m)

1.48

2.5 mm (kg/m)

1.82

3.0 mm (kg/m)

2.15

Expand Collapse

Outer diameter (mmin)

351.4

1.0 mm (kg/m)

0.838

1.25 mm (kg/m)

1.04

1.5 mm (kg/m)

1.24

2.0 mm (kg/m)

1.63

2.5 mm (kg/m)

2.00

3.0 mm (kg/m)

2.37

Expand Collapse

Outer diameter (mmin)

381.5

1.0 mm (kg/m)

0.912

1.25 mm (kg/m)

1.13

1.5 mm (kg/m)

1.35

2.0 mm (kg/m)

1.78

2.5 mm (kg/m)

2.19

3.0 mm (kg/m)

2.59

Expand Collapse

Outer diameter (mmin)

411.6

1.0 mm (kg/m)

0.990

1.25 mm (kg/m)

1.22

1.5 mm (kg/m)

1.46

2.0 mm (kg/m)

1.92

2.5 mm (kg/m)

2.37

3.0 mm (kg/m)

2.81

Expand Collapse

Outer diameter (mmin)

44.51.75

1.0 mm (kg/m)

1.07

1.25 mm (kg/m)

1.33

1.5 mm (kg/m)

1.59

2.0 mm (kg/m)

2.10

2.5 mm (kg/m)

2.59

3.0 mm (kg/m)

3.07

Expand Collapse

Outer diameter (mmin)

481.9

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.44

1.5 mm (kg/m)

1.72

2.0 mm (kg/m)

2.27

2.5 mm (kg/m)

2.81

3.0 mm (kg/m)

3.33

Expand Collapse

Outer diameter (mmin)

502.0

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

1.79

2.0 mm (kg/m)

2.37

2.5 mm (kg/m)

2.93

3.0 mm (kg/m)

3.48

Expand Collapse

Outer diameter (mmin)

552.2

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

1.98

2.0 mm (kg/m)

2.61

2.5 mm (kg/m)

3.24

3.0 mm (kg/m)

3.85

Expand Collapse

Outer diameter (mmin)

572.2

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.05

2.0 mm (kg/m)

2.71

2.5 mm (kg/m)

3.36

3.0 mm (kg/m)

4.00

Expand Collapse

Outer diameter (mmin)

602.4

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.16

2.0 mm (kg/m)

2.86

2.5 mm (kg/m)

3.55

3.0 mm (kg/m)

4.22

Expand Collapse

Outer diameter (mmin)

76.13.00

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.76

2.0 mm (kg/m)

3.65

2.5 mm (kg/m)

4.54

3.0 mm (kg/m)

5.41

Expand Collapse

Outer diameter (mmin)

88.93.50

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

—

2.0 mm (kg/m)

4.29

2.5 mm (kg/m)

5.33

3.0 mm (kg/m)

6.36

Expand Collapse

Square Dimensions

Hide/Show specific columns Edit

Select columns to display

Height x Width (mm)	1.0 mm (kg/m)	1.25 mm (kg/m)	1.5 mm (kg/m)	2.0 mm (kg/m)	2.5 mm (kg/m)	3.0 mm (kg/m)
19 x 19	0.564	0.694	0.820	1.06	—	—
20 x 20	0.595	0.733	0.868	1.12	—	—
25 x 25	0.752	0.930	1.10	1.44	—	—
30 x 30	0.909	1.13	1.34	1.75	2.15	2.39
32 x 32	0.972	1.20	1.43	1.88	2.31	2.58
35 x 35	1.07	1.32	1.57	2.07	2.54	2.86
40 x 40	—	1.52	1.81	2.38	2.93	3.33
50 x 50	—	1.91	2.28	3.01	3.72	4.28
60 x 60	—	—	2.75	3.64	4.50	5.22

Compare parameters

Select one parameter to compare

1.0 mm (kg/m)

1.25 mm (kg/m)

1.5 mm (kg/m)

2.0 mm (kg/m)

2.5 mm (kg/m)

3.0 mm (kg/m)

Height x Width (mm)

19 x 19

1.0 mm (kg/m)

0.564

1.25 mm (kg/m)

0.694

1.5 mm (kg/m)

0.820

2.0 mm (kg/m)

1.06

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

20 x 20

1.0 mm (kg/m)

0.595

1.25 mm (kg/m)

0.733

1.5 mm (kg/m)

0.868

2.0 mm (kg/m)

1.12

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

25 x 25

1.0 mm (kg/m)

0.752

1.25 mm (kg/m)

0.930

1.5 mm (kg/m)

1.10

2.0 mm (kg/m)

1.44

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

30 x 30

1.0 mm (kg/m)

0.909

1.25 mm (kg/m)

1.13

1.5 mm (kg/m)

1.34

2.0 mm (kg/m)

1.75

2.5 mm (kg/m)

2.15

3.0 mm (kg/m)

2.39

Expand Collapse

Height x Width (mm)

32 x 32

1.0 mm (kg/m)

0.972

1.25 mm (kg/m)

1.20

1.5 mm (kg/m)

1.43

2.0 mm (kg/m)

1.88

2.5 mm (kg/m)

2.31

3.0 mm (kg/m)

2.58

Expand Collapse

Height x Width (mm)

35 x 35

1.0 mm (kg/m)

1.07

1.25 mm (kg/m)

1.32

1.5 mm (kg/m)

1.57

2.0 mm (kg/m)

2.07

2.5 mm (kg/m)

2.54

3.0 mm (kg/m)

2.86

Expand Collapse

Height x Width (mm)

40 x 40

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.52

1.5 mm (kg/m)

1.81

2.0 mm (kg/m)

2.38

2.5 mm (kg/m)

2.93

3.0 mm (kg/m)

3.33

Expand Collapse

Height x Width (mm)

50 x 50

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.91

1.5 mm (kg/m)

2.28

2.0 mm (kg/m)

3.01

2.5 mm (kg/m)

3.72

3.0 mm (kg/m)

4.28

Expand Collapse

Height x Width (mm)

60 x 60

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.75

2.0 mm (kg/m)

3.64

2.5 mm (kg/m)

4.50

3.0 mm (kg/m)

5.22

Expand Collapse

Rectangular Dimensions

Hide/Show specific columns Edit

Select columns to display

Height x Width (mm)	1.0 mm (kg/m)	1.25 mm (kg/m)	1.5 mm (kg/m)	2.0 mm (kg/m)	2.5 mm (kg/m)	3.0 mm (kg/m)
25 x 15	0.595	0.733	0.868	1.12	—	—
30 x 10	0.595	0.733	0.868	1.12	—	—
30 x 15	0.673	0.831	0.985	1.28	—	—
30 x 20	0.752	0.930	1.10	1.44	—	—
30 x 25	0.830	1.03	1.22	1.59	—	—
35 x 15	0.752	0.930	1.10	1.44	—	—
35 x 20	0.830	1.03	1.22	1.59	1.95	—
40 x 20	0.909	1.13	1.34	1.75	2.15	—
40 x 25	0.987	1.22	1.46	1.91	2.34	—
40 x 30	1.07	1.32	1.57	2.07	2.54	—
50 x 20	1.07	1.32	1.57	2.07	2.54	2.86
50 x 25	—	1.42	1.69	2.22	2.74	3.10
50 x 30	—	1.52	1.81	2.38	2.93	3.33
50 x 40	—	1.71	2.05	2.69	3.33	3.80
60 x 20	—	1.52	1.81	2.38	2.93	3.33
60 x 30	—	1.71	2.05	2.69	3.33	3.80
60 x 40	—	1.91	2.28	3.01	3.72	4.28
70 x 25	—	—	2.16	2.85	3.52	4.04
70 x 30	—	—	2.28	3.01	3.72	4.28
70 x 50	—	—	2.75	3.64	4.50	5.22
80 x 20	—	—	2.28	3.01	3.72	4.28
80 x 40	—	—	2.75	3.64	4.50	5.22
80 x 60	—	—	—	4.26	5.29	6.16
100 x 40	—	—	—	4.26	5.29	6.16

Compare parameters

Select one parameter to compare

1.0 mm (kg/m)

1.25 mm (kg/m)

1.5 mm (kg/m)

2.0 mm (kg/m)

2.5 mm (kg/m)

3.0 mm (kg/m)

Height x Width (mm)

25 x 15

1.0 mm (kg/m)

0.595

1.25 mm (kg/m)

0.733

1.5 mm (kg/m)

0.868

2.0 mm (kg/m)

1.12

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

30 x 10

1.0 mm (kg/m)

0.595

1.25 mm (kg/m)

0.733

1.5 mm (kg/m)

0.868

2.0 mm (kg/m)

1.12

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

30 x 15

1.0 mm (kg/m)

0.673

1.25 mm (kg/m)

0.831

1.5 mm (kg/m)

0.985

2.0 mm (kg/m)

1.28

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

30 x 20

1.0 mm (kg/m)

0.752

1.25 mm (kg/m)

0.930

1.5 mm (kg/m)

1.10

2.0 mm (kg/m)

1.44

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

30 x 25

1.0 mm (kg/m)

0.830

1.25 mm (kg/m)

1.03

1.5 mm (kg/m)

1.22

2.0 mm (kg/m)

1.59

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

35 x 15

1.0 mm (kg/m)

0.752

1.25 mm (kg/m)

0.930

1.5 mm (kg/m)

1.10

2.0 mm (kg/m)

1.44

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

35 x 20

1.0 mm (kg/m)

0.830

1.25 mm (kg/m)

1.03

1.5 mm (kg/m)

1.22

2.0 mm (kg/m)

1.59

2.5 mm (kg/m)

1.95

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

40 x 20

1.0 mm (kg/m)

0.909

1.25 mm (kg/m)

1.13

1.5 mm (kg/m)

1.34

2.0 mm (kg/m)

1.75

2.5 mm (kg/m)

2.15

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

40 x 25

1.0 mm (kg/m)

0.987

1.25 mm (kg/m)

1.22

1.5 mm (kg/m)

1.46

2.0 mm (kg/m)

1.91

2.5 mm (kg/m)

2.34

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

40 x 30

1.0 mm (kg/m)

1.07

1.25 mm (kg/m)

1.32

1.5 mm (kg/m)

1.57

2.0 mm (kg/m)

2.07

2.5 mm (kg/m)

2.54

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

50 x 20

1.0 mm (kg/m)

1.07

1.25 mm (kg/m)

1.32

1.5 mm (kg/m)

1.57

2.0 mm (kg/m)

2.07

2.5 mm (kg/m)

2.54

3.0 mm (kg/m)

2.86

Expand Collapse

Height x Width (mm)

50 x 25

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.42

1.5 mm (kg/m)

1.69

2.0 mm (kg/m)

2.22

2.5 mm (kg/m)

2.74

3.0 mm (kg/m)

3.10

Expand Collapse

Height x Width (mm)

50 x 30

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.52

1.5 mm (kg/m)

1.81

2.0 mm (kg/m)

2.38

2.5 mm (kg/m)

2.93

3.0 mm (kg/m)

3.33

Expand Collapse

Height x Width (mm)

50 x 40

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.71

1.5 mm (kg/m)

2.05

2.0 mm (kg/m)

2.69

2.5 mm (kg/m)

3.33

3.0 mm (kg/m)

3.80

Expand Collapse

Height x Width (mm)

60 x 20

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.52

1.5 mm (kg/m)

1.81

2.0 mm (kg/m)

2.38

2.5 mm (kg/m)

2.93

3.0 mm (kg/m)

3.33

Expand Collapse

Height x Width (mm)

60 x 30

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.71

1.5 mm (kg/m)

2.05

2.0 mm (kg/m)

2.69

2.5 mm (kg/m)

3.33

3.0 mm (kg/m)

3.80

Expand Collapse

Height x Width (mm)

60 x 40

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.91

1.5 mm (kg/m)

2.28

2.0 mm (kg/m)

3.01

2.5 mm (kg/m)

3.72

3.0 mm (kg/m)

4.28

Expand Collapse

Height x Width (mm)

70 x 25

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.16

2.0 mm (kg/m)

2.85

2.5 mm (kg/m)

3.52

3.0 mm (kg/m)

4.04

Expand Collapse

Height x Width (mm)

70 x 30

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.28

2.0 mm (kg/m)

3.01

2.5 mm (kg/m)

3.72

3.0 mm (kg/m)

4.28

Expand Collapse

Height x Width (mm)

70 x 50

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.75

2.0 mm (kg/m)

3.64

2.5 mm (kg/m)

4.50

3.0 mm (kg/m)

5.22

Expand Collapse

Height x Width (mm)

80 x 20

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.28

2.0 mm (kg/m)

3.01

2.5 mm (kg/m)

3.72

3.0 mm (kg/m)

4.28

Expand Collapse

Height x Width (mm)

80 x 40

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.75

2.0 mm (kg/m)

3.64

2.5 mm (kg/m)

4.50

3.0 mm (kg/m)

5.22

Expand Collapse

Height x Width (mm)

80 x 60

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

—

2.0 mm (kg/m)

4.26

2.5 mm (kg/m)

5.29

3.0 mm (kg/m)

6.16

Expand Collapse

Height x Width (mm)

100 x 40

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

—

2.0 mm (kg/m)

4.26

2.5 mm (kg/m)

5.29

3.0 mm (kg/m)

6.16

Expand Collapse

Mechanical Properties

Hide/Show specific columns Edit

Select columns to display

	Yield strength R_p0.2 (min MPa)	Tensile strength R_m (min MPa)	Elongation A (min %)
CR420LA	420	490	12
HR420LA	420	490	12

Compare parameters

Select one parameter to compare

Tensile strength R_m
(min MPa)

Elongation A
(min %)

CR420LA

Yield strength R_p0.2
(min MPa)

420

Tensile strength R_m
(min MPa)

490

Elongation A
(min %)

12

Expand Collapse

HR420LA

Yield strength R_p0.2
(min MPa)

420

Tensile strength R_m
(min MPa)

490

Elongation A
(min %)

12

Expand Collapse

Mechanical properties meet the requirements of EN 10305 (+CR2).

Chemical Composition (ladle analysis)

Hide/Show specific columns Edit

Select columns to display

	C (max %)	Si (max %)	Mn (max %)	P (max %)	S (max %)	Al_tot¹⁾ (min %)
CR420LA	0.16	0.55	1.70	0.025	0.025	0.020
HR420LA	0.16	0.55	1.70	0.025	0.025	0.020

Compare parameters

Select one parameter to compare

Si
(max %)

Mn
(max %)

P
(max %)

S
(max %)

Al_tot¹⁾
(min %)

CR420LA

C
(max %)

0.16

Si
(max %)

0.55

Mn
(max %)

1.70

P
(max %)

0.025

S
(max %)

0.025

Al_tot¹⁾
(min %)

0.020

Expand Collapse

HR420LA

C
(max %)

0.16

Si
(max %)

0.55

Mn
(max %)

1.70

P
(max %)

0.025

S
(max %)

0.025

Al_tot¹⁾
(min %)

0.020

Expand Collapse

Chemical composition meets the requirements of EN 10305.

If other chemical elements such as Ti, Nb or V are used, the content of these elements are reported in the inspection document.

¹⁾ This requirement is not applicable provided the steel contains a sufficient amount of other nitrogen binding elements, such as Ti, Nb or V.

Tolerances

Tolerance Circular

Hide/Show specific columns Edit

Select columns to display

Characteristic	Circular precision tubes Tolerances meet or exceed the requirements of EN 10305-3
Outside diameter (D) ⁽¹ D < 20 mm 20 ≤ D < 32 mm 32 ≤ D < 44 mm 44 ≤ D < 55 mm 55 ≤ D < 70 mm 70 ≤ D < 80 mm 80 ≤ D < 100 mm	±0.12 mm ±0.15 mm ±0.20 mm ±0.25 mm ±0.30 mm ±0.35 mm ±0.40 mm
Out-of-roundness	The diameter tolerances include the out-of-roundness
Thickness (T)	T ≤ 1.5 mm: ±0.15 mm T>1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller
Straightness	Maximum 0.15% of measured length
Height of internal weld bead, g; Bead removed Bead not removed	g ≤ 0.3 mm g < 0.8 mm, when T ≤ 1.5 mm g < 0.6 x T, when 1.5 mm < T ≤ 3.0 mm
Mill length	0/+50 mm, standard length 6000 mm
Exact length, single cutting	Agreed at the time of enquiry and order
Exact length, bundle cutting	Agreed at the time of enquiry and order

Compare parameters

Select one parameter to compare

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

Characteristic

Outside diameter (D) ⁽¹
D < 20 mm
20 ≤ D < 32 mm
32 ≤ D < 44 mm
44 ≤ D < 55 mm
55 ≤ D < 70 mm
70 ≤ D < 80 mm
80 ≤ D < 100 mm

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

±0.12 mm
±0.15 mm
±0.20 mm
±0.25 mm
±0.30 mm
±0.35 mm
±0.40 mm

Characteristic

Out-of-roundness

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

The diameter tolerances include the out-of-roundness

Characteristic

Thickness (T)

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

T ≤ 1.5 mm: ±0.15 mm
T>1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller

Characteristic

Straightness

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

Maximum 0.15% of measured length

Characteristic

Height of internal weld bead, g;
Bead removed
Bead not removed

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

g ≤ 0.3 mm
g < 0.8 mm, when T ≤ 1.5 mm
g < 0.6 x T, when 1.5 mm < T ≤ 3.0 mm

Characteristic

Mill length

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

0/+50 mm, standard length 6000 mm

Characteristic

Exact length, single cutting

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

Agreed at the time of enquiry and order

Characteristic

Exact length, bundle cutting

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

Agreed at the time of enquiry and order

¹⁾For a maximum distance of 100 mm, the ends may, due to the cutting method, have diameters outside the tolerances.

Tolerance Square

Hide/Show specific columns Edit

Select columns to display

Characteristic	Square precision tubes Tolerances meet or exceed the requirements of EN 10305-5
Outside dimensions (H) and (B), longer side¹⁾ H < 25 mm 25 ≤ H < 40 mm 40 ≤ H < 60 mm 60≤ H < 70 mm	±0.20 mm ±0.25 mm ±0.30 mm ±0.35 mm
Side concavity and convexity	Included in outside dimension tolerance
Thickness (T)	T ≤ 1.5 mm: ±0.15 mm T>1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller
Straightness	Maximum 0.15% of measured tube length when shorter side length > 30 mm Maximum 0.25% of measured tube length when the shorter side length ≤ 30 mm
Location of weld seam from the centre line	On narrow side for square and rectangular, optionally on wide side. On wide side for flat oval and ellipse. ± 10% of side length or ± 3 mm, whichever is greater.
Height of internal weld bead, g; Bead removed Bead not removed	g ≤ 0.3 mm g < 0.8 mm, when T ≤ 1.5 mm g < 0.6 x T, when 1.5 mm < T ≤ 3.0 mm
Squareness of side	90° ±1°
Corner profile	R < 1.5 x T, when T ≤ 2.5 mm R < 2.2 x T, when T > 2.5 mm
Twist (V)	V ≤ 3 mm for B and H ≤ 30 mm V ≤ B/10 or ≤ H/10 for B or H > 30 mm
Mill length	0/+50 mm, standard length 6000 mm
Exact length, bundle cutting	Agreed at the time of enquiry and order
Exact length, single cutting	Agreed at the time of enquiry and order

Compare parameters

Select one parameter to compare

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Characteristic

Outside dimensions (H) and (B), longer side¹⁾
H < 25 mm
25 ≤ H < 40 mm
40 ≤ H < 60 mm
60≤ H < 70 mm

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

±0.20 mm
±0.25 mm
±0.30 mm
±0.35 mm

Characteristic

Side concavity and convexity

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Included in outside dimension tolerance

Characteristic

Thickness (T)

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

T ≤ 1.5 mm: ±0.15 mm
T>1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller

Characteristic

Straightness

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Maximum 0.15% of measured tube length when shorter side length > 30 mm
Maximum 0.25% of measured tube length when the shorter side length ≤ 30 mm

Characteristic

Location of weld seam from the centre line

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

On narrow side for square and rectangular, optionally on wide side. On wide side for flat oval and ellipse. ± 10% of side length or ± 3 mm, whichever is greater.

Characteristic

Height of internal weld bead, g;
Bead removed
Bead not removed

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

g ≤ 0.3 mm
g < 0.8 mm, when T ≤ 1.5 mm
g < 0.6 x T, when 1.5 mm < T ≤ 3.0 mm

Characteristic

Squareness of side

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

90° ±1°

Characteristic

Corner profile

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

R < 1.5 x T, when T ≤ 2.5 mm
R < 2.2 x T, when T > 2.5 mm

Characteristic

Twist (V)

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

V ≤ 3 mm for B and H ≤ 30 mm
V ≤ B/10 or ≤ H/10 for B or H > 30 mm

Characteristic

Mill length

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

0/+50 mm, standard length 6000 mm

Characteristic

Exact length, bundle cutting

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Agreed at the time of enquiry and order

Characteristic

Exact length, single cutting

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Agreed at the time of enquiry and order

¹⁾For a maximum distance of 100 mm, the ends may, due to the cutting method, have diameters outside the tolerances.

Tolerance Rectangular

Hide/Show specific columns Edit

Select columns to display

Characteristic	Rectangular precision tubes Tolerances meet or exceed the requirements of EN 10305-5
Outside dimensions (H) and (B), longer side¹⁾ H < 25 mm 25 ≤ H < 40 mm 40 ≤ H < 60 mm 60≤ H < 70 mm 70 ≤ H < 80 mm 80 ≤ H < 90 mm 90 ≤ H < 100 mm 100 ≤ H < 120 mm	±0.20 mm ±0.25 mm ±0.30 mm ±0.35 mm ±0.40 mm ±0.50 mm ±0.60 mm ±0.65 mm
Side concavity and convexity	Included in outside dimension tolerance
Thickness (T)	T ≤ 1.5 mm: ±0.15 mm T>1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller
Straightness	Maximum 0.15% of measured tube length when shorter side length > 30 mm Maximum 0.25% of measured tube length when the shorter side length ≤ 30 mm
Location of weld seam from the centre line	On narrow side for square and rectangular, optionally on wide side. On wide side for flat oval and ellipse. ± 10% of side length or ± 3 mm, whichever is greater.
Height of internal weld bead, g; Bead removed Bead not removed	g ≤ 0.3 mm g < 0.8 mm, when T ≤ 1.5 mm g < 0.6 x T, when 1.5 mm < T ≤ 3.0 mm
Squareness of side	90° ±1°
Corner profile	R < 1.5 x T, when T ≤ 2.5 mm R < 2.2 x T, when T > 2.5 mm
Twist (V)	V ≤ 3 mm for B and H ≤ 30 mm V ≤ B/10 or ≤ H/10 for B or H > 30 mm
Mill length	0/+50 mm, standard length 6000 mm
Exact length, single cutting	Agreed at the time of enquiry and order
Exact length, bundle cutting	Agreed at the time of enquiry and order

Compare parameters

Select one parameter to compare

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Characteristic

Outside dimensions (H) and (B), longer side¹⁾
H < 25 mm
25 ≤ H < 40 mm
40 ≤ H < 60 mm
60≤ H < 70 mm
70 ≤ H < 80 mm
80 ≤ H < 90 mm
90 ≤ H < 100 mm
100 ≤ H < 120 mm

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

±0.20 mm
±0.25 mm
±0.30 mm
±0.35 mm
±0.40 mm
±0.50 mm
±0.60 mm
±0.65 mm

Characteristic

Side concavity and convexity

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Included in outside dimension tolerance

Characteristic

Thickness (T)

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

T ≤ 1.5 mm: ±0.15 mm
T>1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller

Characteristic

Straightness

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Maximum 0.15% of measured tube length when shorter side length > 30 mm
Maximum 0.25% of measured tube length when the shorter side length ≤ 30 mm

Characteristic

Location of weld seam from the centre line

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

On narrow side for square and rectangular, optionally on wide side. On wide side for flat oval and ellipse. ± 10% of side length or ± 3 mm, whichever is greater.

Characteristic

Height of internal weld bead, g;
Bead removed
Bead not removed

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

g ≤ 0.3 mm
g < 0.8 mm, when T ≤ 1.5 mm
g < 0.6 x T, when 1.5 mm < T ≤ 3.0 mm

Characteristic

Squareness of side

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

90° ±1°

Characteristic

Corner profile

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

R < 1.5 x T, when T ≤ 2.5 mm
R < 2.2 x T, when T > 2.5 mm

Characteristic

Twist (V)

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

V ≤ 3 mm for B and H ≤ 30 mm
V ≤ B/10 or ≤ H/10 for B or H > 30 mm

Characteristic

Mill length

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

0/+50 mm, standard length 6000 mm

Characteristic

Exact length, single cutting

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Agreed at the time of enquiry and order

Characteristic

Exact length, bundle cutting

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Agreed at the time of enquiry and order

¹⁾For a maximum distance of 100 mm, the ends may, due to the cutting method, have diameters outside the tolerances.

Coating and Surfaces

Surface designation and general usability

Hide/Show specific columns Edit

Select columns to display

Designation	Definition	Usability
C	Cold rolled	Paintability or chromium plating are required
GI	Zinc coated (zinc 99%)	Corrosion resistance is required
ZA	Galfan coated (zinc 95%-aluminium 5%)	Corrosion resistance and demanding forming are required
GA	Galvannealed coated (zinc 90%-iron 10%)	Corrosion resistance and paintability are required

Compare parameters

Select one parameter to compare

Definition

Usability

Designation

C

Definition

Cold rolled

Usability

Paintability or chromium plating are required

Expand Collapse

Designation

GI

Definition

Zinc coated (zinc 99%)

Usability

Corrosion resistance is required

Expand Collapse

Designation

ZA

Definition

Galfan coated (zinc 95%-aluminium 5%)

Usability

Corrosion resistance and demanding forming are required

Expand Collapse

Designation

GA

Definition

Galvannealed coated (zinc 90%-iron 10%)

Usability

Corrosion resistance and paintability are required

Expand Collapse

Surface is slightly oiled to protect it from corrosion during transportation and short-term storage. By request, tubes can be delivered dry, however in that case SSAB will not be responsible for any possible rust.

Surface roughness, Ra

Hide/Show specific columns Edit

Select columns to display

Designation	Ra value
C	< 0.6 μm

Compare parameters

Select one parameter to compare

Ra value

Designation

C

Ra value

< 0.6 μm

Different metal coatings and minimum coating mass

Hide/Show specific columns Edit

Select columns to display

Coating thickness ¹⁾(µm)	Zinc (GI)²⁾ (g/m²)	Galfan (ZA)³⁾ (g/m²)	Galvannealed (GA)²⁾ (g/m²)
7	GI50/50	—	GA50/50
8	GI60/60	—	GA60/60
20	GI115/115	ZA255	—

Compare parameters

Select one parameter to compare

Zinc (GI)²⁾ (g/m²)

Galfan (ZA)³⁾ (g/m²)

Galvannealed (GA)²⁾ (g/m²)

Coating thickness ¹⁾(µm)

7

Zinc (GI)²⁾ (g/m²)

GI50/50

Galfan (ZA)³⁾ (g/m²)

—

Galvannealed (GA)²⁾ (g/m²)

GA50/50

Expand Collapse

Coating thickness ¹⁾(µm)

8

Zinc (GI)²⁾ (g/m²)

GI60/60

Galfan (ZA)³⁾ (g/m²)

—

Galvannealed (GA)²⁾ (g/m²)

GA60/60

Expand Collapse

Coating thickness ¹⁾(µm)

20

Zinc (GI)²⁾ (g/m²)

GI115/115

Galfan (ZA)³⁾ (g/m²)

ZA255

Galvannealed (GA)²⁾ (g/m²)

—

Expand Collapse

¹⁾ Theoretical guidance values for coating thickness per surface.

²⁾ Minimum coating mass - g/m² refers the coating mass for each side in g/m² according to VDA 239-100.

³⁾ Minimum coating mass - g/m² refers the total weight of coatings on both sides of a 1 m² plate.

Indicative specification for proper coating selection

Hide/Show specific columns Edit

Select columns to display

Coating type	Coating mass (g/m²)	Coating life - marine (year)	Properties
GI	50/50	10	Good weldability and formability with tolerable corrosion resistance.
GI	115/115	25	Good combination of corrosion resistance and usability.
ZA	225	80	Superior corrosion resistance in marine condition.
GA	50/50	15	Superior paint adhesion and corrosion resistance as painted. Weldability in same level as cold rolled material under proper welding conditions.
GA	60/60	17	Superior paint adhesion and corrosion resistance as painted. Weldability in same level as cold rolled material under proper welding conditions.
GA	140	20	Superior paint adhesion and corrosion resistance as painted. Weldability in same level as cold rolled material under proper welding conditions.

Compare parameters

Select one parameter to compare

Coating mass (g/m²)

Coating life - marine (year)

Properties

Coating type

GI

Coating mass (g/m²)

50/50

Coating life - marine (year)

10

Properties

Good weldability and formability with tolerable corrosion resistance.

Expand Collapse

Coating type

GI

Coating mass (g/m²)

115/115

Coating life - marine (year)

25

Properties

Good combination of corrosion resistance and usability.

Expand Collapse

Coating type

ZA

Coating mass (g/m²)

225

Coating life - marine (year)

80

Properties

Superior corrosion resistance in marine condition.

Expand Collapse

Coating type

GA

Coating mass (g/m²)

50/50

Coating life - marine (year)

15

Properties

Superior paint adhesion and corrosion resistance as painted. Weldability in same level as cold rolled material under proper welding conditions.

Expand Collapse

Coating type

GA

Coating mass (g/m²)

60/60

Coating life - marine (year)

17

Properties

Superior paint adhesion and corrosion resistance as painted. Weldability in same level as cold rolled material under proper welding conditions.

Expand Collapse

Coating type

GA

Coating mass (g/m²)

140

Coating life - marine (year)

20

Properties

Superior paint adhesion and corrosion resistance as painted. Weldability in same level as cold rolled material under proper welding conditions.

Expand Collapse

Delivery Conditions

The tubes are not intended to undergo any heat treatment after welding and sizing as that may alter the mechanical properties of the material.

The tubes are oiled with anti-corrosive oil.

Fabrication and Other Recommendations

For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

Docol® Tube 420LA

General Product Description

Dimension Range

Select one parameter to compare

Circular Dimensions

Select one parameter to compare

Square Dimensions

Select one parameter to compare

Rectangular Dimensions

Select one parameter to compare

Mechanical Properties

Select one parameter to compare

Chemical Composition (ladle analysis)

Select one parameter to compare

Tolerances

Tolerance Circular

Select one parameter to compare

Tolerance Square

Select one parameter to compare

Tolerance Rectangular

Select one parameter to compare

Coating and Surfaces

Surface designation and general usability

Select one parameter to compare

Surface roughness, Ra

Select one parameter to compare

Different metal coatings and minimum coating mass

Select one parameter to compare

Indicative specification for proper coating selection

Select one parameter to compare

Delivery Conditions

Fabrication and Other Recommendations

Other precision tube products

Docol® Tube 700LA

Docol® Tube 780DP

Docol® Tube 980DP

SSAB Boron Tube 22

SSAB Form Tube 220

SSAB Form Tube 320

Get datasheet by email

General Product Description

Dimension Range

Select one parameter to compare

Comparison

Circular Dimensions

Select one parameter to compare

Comparison

Square Dimensions

Select one parameter to compare

Comparison

Rectangular Dimensions

Select one parameter to compare

Comparison

Mechanical Properties

Select one parameter to compare

Comparison

Chemical Composition (ladle analysis)

Select one parameter to compare

Comparison

Tolerances

Tolerance Circular

Select one parameter to compare

Comparison

Tolerance Square

Select one parameter to compare

Comparison

Tolerance Rectangular

Select one parameter to compare

Comparison

Coating and Surfaces

Surface designation and general usability

Select one parameter to compare

Comparison

Surface roughness, Ra

Select one parameter to compare

Comparison

Different metal coatings and minimum coating mass

Select one parameter to compare

Comparison

Indicative specification for proper coating selection

Select one parameter to compare

Comparison

Delivery Conditions

Fabrication and Other Recommendations

Other precision tube products

Docol® Tube 700LA

Docol® Tube 780DP

Docol® Tube 980DP

SSAB Boron Tube 22

SSAB Form Tube 220

SSAB Form Tube 320