SSAB Laser® 250C
Download data sheet
Download data sheet
SSAB Laser® 250C is an advanced structural cold forming steel for laser cutting. The SSAB guarantee for flatness, both before and after laser cutting, is ≤ 3 mm/m deviation.
SSAB Laser® 250C meets and exceeds the requirements of S235J2C+N in EN 10025-2. Dual certification and CE marking are available upon request.
The mechanical properties are tested transverse to the direction of rolling.
1) A80 value applies for thicknesses < 3.00 mm.
2) A5 value applies for thicknesses ≥ 3.00 mm.
3) The bending guarantee is valid for both longitudinal and transverse direction.
All SSAB Laser® steels are aluminum-killed (Al ≥ 0.015%) and grain-refined. Additionally, niobium (Nb), vanadium (V), titanium (Ti) and/or boron (B) may be used as single alloying element or in any combination.
All SSAB Laser® products are delivered with SSAB Laser® tolerances, which means increased guarantees compared to corresponding EN standards. Detailed information is available on ssab.com.
Hot rolled sheet: SSAB Laser® tolerances correspond to ⅔ of EN 10051 as default. Tighter tolerances are available upon request.
Hot rolled plate: SSAB Laser® tolerances correspond to ¾ of EN 10029 as default.
Hot rolled sheet: -0/+20 mm for mill edge sheet; -0/+2 mm for cut edge sheet. Tighter tolerances are available upon request.
Hot rolled plate: -0/+4-10mm depending on the thickness.
Tolerances according to EN 10029 for plate and according to EN 10051 for sheet.
Hot rolled sheet: ≤ 3 mm/m flatness deviation for both delivery condition and laser cut parts.
Hot rolled plate: ≤ 3 mm/m flatness deviation for both delivery condition and laser cut parts.
According to EN 10163-2 Class A, Subclass 3.
Normalized rolled.
Hot rolled sheet: as rolled or pickled and oiled surface condition with mill edge. Cut edge is available upon request.
Hot rolled plate: as rolled surface condition and cut edges as default.
All SSAB Laser® products have been optimized for laser cutting, cold forming and welding.
For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.
Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.