Docol® S600MC

General Product Description

The high-strength structural steel Docol S600MC is a hot-rolled steel made for cold forming, with a minimum yield strength of 600 MPa for stronger and lighter structures. Docol S600MC meets or exceeds the requirements of S600MC in EN 10149-2. Typical applications include a wide range of heavy trucks components and parts, such as frame rails and cross-members. Docol S600MC comes in coils, slit coils and cut-to-length sheets.

Dimension Range

Hot rolled / UC: thickness 2.00-10.00 mm, width up to 1600 mm.

Slit strip and cut to length sheets are available upon request.

Mechanical Properties

Hide/Show specific columns Edit

Select columns to display

Thickness (mmin)	Standard	Coating	Test direction	Yield strength R_eH¹⁾ (min MPaksi)	Tensile strength R_m (MPaksi)	Elongation A₈₀²⁾ (min %)	Elongation A₅³⁾ (min %)	Min. inner bending radius for a 90° bend⁴⁾ (x t)
2.00 - 3.000.079 - 0.118	SSAB	UC	L	60087	650 - 82094 - 119	13	16	0.7
3.01 - 6.000.119 - 0.236	SSAB	UC	L	60087	650 - 82094 - 119	—	16	1.1
6.01 - 10.000.237 - 0.393	SSAB	UC	L	60087	650 - 82094 - 119	—	16	1.4

Compare parameters

Select one parameter to compare

Standard

Coating

Test direction

Yield strength R_eH¹⁾
(min MPaksi)

Tensile strength R_m
(MPaksi)

Elongation A₈₀²⁾
(min %)

Elongation A₅³⁾
(min %)

Min. inner bending radius for a 90° bend⁴⁾
(x t)

Thickness
(mmin)

2.00 - 3.000.079 - 0.118

Standard

SSAB

Coating

UC

Test direction

L

Yield strength R_eH¹⁾
(min MPaksi)

60087

Tensile strength R_m
(MPaksi)

650 - 82094 - 119

Elongation A₈₀²⁾
(min %)

13

Elongation A₅³⁾
(min %)

16

Min. inner bending radius for a 90° bend⁴⁾
(x t)

0.7

Expand Collapse

Thickness
(mmin)

3.01 - 6.000.119 - 0.236

Standard

SSAB

Coating

UC

Test direction

L

Yield strength R_eH¹⁾
(min MPaksi)

60087

Tensile strength R_m
(MPaksi)

650 - 82094 - 119

Elongation A₈₀²⁾
(min %)

—

Elongation A₅³⁾
(min %)

16

Min. inner bending radius for a 90° bend⁴⁾
(x t)

1.1

Expand Collapse

Thickness
(mmin)

6.01 - 10.000.237 - 0.393

Standard

SSAB

Coating

UC

Test direction

L

Yield strength R_eH¹⁾
(min MPaksi)

60087

Tensile strength R_m
(MPaksi)

650 - 82094 - 119

Elongation A₈₀²⁾
(min %)

—

Elongation A₅³⁾
(min %)

16

Min. inner bending radius for a 90° bend⁴⁾
(x t)

1.4

Expand Collapse

¹⁾ If R_eH is not applicable then Rp_0.2 is used.

²⁾ A₈₀ value applies for thicknesses < 3.00 mm.

³⁾ A₅ value applies for thicknesses ≥ 3.00 mm.

⁴⁾ For both longitudinal and transverse direction.

Impact Properties

Hide/Show specific columns Edit

Select columns to display

Product	Min. impact energy for longitudinal testing, Charpy V 10x10 mm test specimen
Docol S600MC D	40 J / -20 °C29 ft-lbs / -4 °F
Docol S600MC E	27 J / -40 °C20 ft-lbs / -40 °F

Compare parameters

Select one parameter to compare

Min. impact energy for longitudinal testing,
Charpy V 10x10 mm test specimen

Product

Docol S600MC D

Min. impact energy for longitudinal testing,
Charpy V 10x10 mm test specimen

40 J / -20 °C29 ft-lbs / -4 °F

Product

Docol S600MC E

Min. impact energy for longitudinal testing,
Charpy V 10x10 mm test specimen

27 J / -40 °C20 ft-lbs / -40 °F

Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. The specified minimum value corresponds to a full-size specimen.

Chemical Composition (heat analysis)

Hide/Show specific columns Edit

Select columns to display

C (max %)	Si (max %)	Mn (max %)	P (max %)	S (max %)	Nb (max %)	V (max %)	Ti (max %)
0.12	0.21 ¹⁾	1.90	0.025	0.010	0.09 ²⁾	0.20 ²⁾	0.15 ²⁾

Compare parameters

Select one parameter to compare

Si
(max %)

Mn
(max %)

P
(max %)

S
(max %)

Nb
(max %)

V
(max %)

Ti
(max %)

C
(max %)

0.12

Si
(max %)

0.21 ¹⁾

Mn
(max %)

1.90

P
(max %)

0.025

S
(max %)

0.010

Nb
(max %)

0.09 ²⁾

V
(max %)

0.20 ²⁾

Ti
(max %)

0.15 ²⁾

Expand Collapse

¹⁾ If the material is to be hot-dip galvanized, this must be specified in the order. Galvanizing class A available upon request.

²⁾ Sum of Nb, V and Ti = max 0.22%.

The steel is grain refined.

Carbon Equivalent CET(CEV)

Hide/Show specific columns Edit

Select columns to display

Thickness (mmin)	2.00 - 10.000.079 - 0.393
Typ CET(CEV)	0.21 (0.33)

Compare parameters

Select one parameter to compare

2.00 - 10.000.079 - 0.393

Thickness (mmin)

Typ CET(CEV)

2.00 - 10.000.079 - 0.393

0.21 (0.33)

Tolerances

Hot rolled (UC): Tolerances in accordance to EN 10051.

Customized dimensional and shape tolerances are available upon request.

Surface Treatments

Uncoated (UC): available as black or pickled and oiled.

All surface treatments are in accordance with RoHS directive (2011/65/EU) and do not contain Chromium VI (Cr⁶⁺). Surface treatments provide only temporary surface protection during transportation and storage. In order to avoid corrosion damages, care must be taken to keep the products dry during transportation and storage. If they become wet, they must be separated and situated so that they are dried quickly.

Fabrication and Other Recommendations

For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

Docol® S600MC high strength low alloy

General Product Description

Dimension Range

Mechanical Properties

Select one parameter to compare

Impact Properties

Select one parameter to compare

Chemical Composition (heat analysis)

Select one parameter to compare

Carbon Equivalent CET(CEV)

Select one parameter to compare

Tolerances

Surface Treatments

Fabrication and Other Recommendations

Docol® High Strength Low Alloy steel product offer

Docol® 420LA high strength low alloy

Docol HR100XF

Docol HR110XF

Docol® S600MC high strength low alloy

Docol® S650MC high strength low alloy

Docol® S700MC high strength low alloy

Docol® S900MC high strength low alloy

Docol S960MC

Docol® 460LA high strength low alloy

Docol® 500LA high strength low alloy

Docol® 550LA high strength low alloy

Docol® 600LA high strength low alloy

Docol® 650LA high strength low alloy

Docol® 700LA high strength low alloy

Related content

Get datasheet by email

General Product Description

Dimension Range

Mechanical Properties

Select one parameter to compare

Comparison

Impact Properties

Select one parameter to compare

Comparison

Chemical Composition (heat analysis)

Select one parameter to compare

Comparison

Carbon Equivalent CET(CEV)

Select one parameter to compare

Comparison

Tolerances

Surface Treatments

Fabrication and Other Recommendations

Docol® High Strength Low Alloy steel product offer

Docol® 420LA high strength low alloy

Docol HR100XF

Docol HR110XF

Docol® S600MC high strength low alloy

Docol® S650MC high strength low alloy

Docol® S700MC high strength low alloy

Docol® S900MC high strength low alloy

Docol S960MC

Docol® 460LA high strength low alloy

Docol® 500LA high strength low alloy

Docol® 550LA high strength low alloy

Docol® 600LA high strength low alloy

Docol® 650LA high strength low alloy

Docol® 700LA high strength low alloy

Related content

AHSS trial material stock

Recommended AHSS steels for car applications

Forming data for Docol® AHSS steels