SSAB Domex® Tube 355J2H
Download data sheet
Product & services
Brands & products
SSAB Domex
Product offer and datasheets
Tubes
SSAB Domex Tube 355 J2H
Tubes
SSAB Domex Tube 355 J2H
Current page
On this page
General Product Description
SSAB Domex Tube 355J2H is cold formed advanced structural hollow section. It meets or exceeds the requirements of standard EN 10219 and is available in circular, rectangular, square and special shapes. It is typically used in advanced engineering and construction where lower costs and safety are important. It has very clean chemistry and uniform quality. The impact ductility is tested at -40°C and it is suitable for hot-dip galvanizing. Also welding in corner areas is always permitted. SSAB Domex Tube 355J2H is manufactured by cold forming and high frequency welding from clean, high quality environmentally friendly steel by modern and efficient tube lines.
Dimension Range
SSAB Domex Tube 355J2H is available in circular, square and rectangular shapes.
Hide/Show specific columns Edit
Select columns to display
| Shapes | Dimensions |
|---|---|
| Circular (mmin) | 42.4 - 323.91.67 - 12.75 |
| Square (mmin) | 40x40 - 300x300 |
| Rectangular (mmin) | 50x30 - 400x200 |
| Wall thickness (mmin) | 2.0 - 12.50.079 - 0.492 |
| Mill length (mm) | 6000/12 000 mm |
Compare parameters
Select one parameter to compare
Comparison
Shapes
Circular (mmin)
Dimensions
42.4 - 323.91.67 - 12.75
Shapes
Square (mmin)
Dimensions
40x40 - 300x300
Shapes
Rectangular (mmin)
Dimensions
50x30 - 400x200
Shapes
Wall thickness (mmin)
Dimensions
2.0 - 12.50.079 - 0.492
Shapes
Mill length (mm)
Dimensions
6000/12 000 mm
Other shapes, sizes and lengths are available upon request.
Circular Dimensions
Hide/Show specific columns Edit
Select columns to display
| Outer diameter (mmin) | 2.0 mm (kg/m) | 2.5 mm (kg/m) | 3.0 mm (kg/m) | 4.0 mm (kg/m) | 5.0 mm (kg/m) | 6.0 mm (kg/m) | 8.0 mm (kg/m) | 10.0 mm (kg/m) | 12.5 mm (kg/m) |
|---|---|---|---|---|---|---|---|---|---|
| 42.41.67 | 1.99 | 2.46 | 2.91 | — | — | — | — | — | — |
| 48.31.90 | 2.28 | 2.82 | 3.35 | 4.37 | — | — | — | — | — |
| 60.32.37 | 2.88 | 3.56 | 4.24 | 5.55 | 6.82 | — | — | — | — |
| 76.13.00 | 3.65 | 4.54 | 5.41 | 7.11 | 8.77 | — | — | — | — |
| 88.93.50 | — | — | 6.36 | 8.38 | 10.4 | 12.3 | — | — | — |
| 101.64.000 | — | — | 7.29 | 9.63 | 11.9 | 14.2 | — | — | — |
| 1084.25 | — | — | 7.77 | 10.3 | 12.7 | 15.1 | — | — | — |
| 114.34.500 | — | — | 8.23 | 10.9 | 13.5 | 16.0 | — | — | — |
| 1275.00 | — | — | 9.17 | 12.1 | 15.0 | 17.9 | — | — | — |
| 139.75.500 | — | — | 10.1 | 13.4 | 16.6 | 19.8 | 26.0 | 32.0 | — |
| 168.36.626 | — | — | 12.2 | 16.2 | 20.1 | 24.0 | 31.6 | 39.0 | — |
| 219.18.626 | — | — | — | 21.2 | 26.4 | 31.5 | 41.7 | 51.6 | 63.7 |
| 27310.7 | — | — | — | 26.5 | 33.1 | 39.5 | 52.3 | 64.9 | 80.3 |
| 323.912.75 | — | — | — | — | 39.3 | 47.0 | 62.3 | 77.4 | 96.0 |
Compare parameters
Select one parameter to compare
Comparison
Outer diameter (mmin)
42.41.67
2.0 mm (kg/m)
1.99
2.5 mm (kg/m)
2.46
3.0 mm (kg/m)
2.91
4.0 mm (kg/m)
—
5.0 mm (kg/m)
—
6.0 mm (kg/m)
—
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Outer diameter (mmin)
48.31.90
2.0 mm (kg/m)
2.28
2.5 mm (kg/m)
2.82
3.0 mm (kg/m)
3.35
4.0 mm (kg/m)
4.37
5.0 mm (kg/m)
—
6.0 mm (kg/m)
—
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Outer diameter (mmin)
60.32.37
2.0 mm (kg/m)
2.88
2.5 mm (kg/m)
3.56
3.0 mm (kg/m)
4.24
4.0 mm (kg/m)
5.55
5.0 mm (kg/m)
6.82
6.0 mm (kg/m)
—
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Outer diameter (mmin)
76.13.00
2.0 mm (kg/m)
3.65
2.5 mm (kg/m)
4.54
3.0 mm (kg/m)
5.41
4.0 mm (kg/m)
7.11
5.0 mm (kg/m)
8.77
6.0 mm (kg/m)
—
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Outer diameter (mmin)
88.93.50
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
6.36
4.0 mm (kg/m)
8.38
5.0 mm (kg/m)
10.4
6.0 mm (kg/m)
12.3
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Outer diameter (mmin)
101.64.000
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
7.29
4.0 mm (kg/m)
9.63
5.0 mm (kg/m)
11.9
6.0 mm (kg/m)
14.2
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Outer diameter (mmin)
1084.25
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
7.77
4.0 mm (kg/m)
10.3
5.0 mm (kg/m)
12.7
6.0 mm (kg/m)
15.1
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Outer diameter (mmin)
114.34.500
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
8.23
4.0 mm (kg/m)
10.9
5.0 mm (kg/m)
13.5
6.0 mm (kg/m)
16.0
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Outer diameter (mmin)
1275.00
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
9.17
4.0 mm (kg/m)
12.1
5.0 mm (kg/m)
15.0
6.0 mm (kg/m)
17.9
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Outer diameter (mmin)
139.75.500
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
10.1
4.0 mm (kg/m)
13.4
5.0 mm (kg/m)
16.6
6.0 mm (kg/m)
19.8
8.0 mm (kg/m)
26.0
10.0 mm (kg/m)
32.0
12.5 mm (kg/m)
—
Expand
Collapse
Outer diameter (mmin)
168.36.626
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
12.2
4.0 mm (kg/m)
16.2
5.0 mm (kg/m)
20.1
6.0 mm (kg/m)
24.0
8.0 mm (kg/m)
31.6
10.0 mm (kg/m)
39.0
12.5 mm (kg/m)
—
Expand
Collapse
Outer diameter (mmin)
219.18.626
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
21.2
5.0 mm (kg/m)
26.4
6.0 mm (kg/m)
31.5
8.0 mm (kg/m)
41.7
10.0 mm (kg/m)
51.6
12.5 mm (kg/m)
63.7
Expand
Collapse
Outer diameter (mmin)
27310.7
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
26.5
5.0 mm (kg/m)
33.1
6.0 mm (kg/m)
39.5
8.0 mm (kg/m)
52.3
10.0 mm (kg/m)
64.9
12.5 mm (kg/m)
80.3
Expand
Collapse
Outer diameter (mmin)
323.912.75
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
39.3
6.0 mm (kg/m)
47.0
8.0 mm (kg/m)
62.3
10.0 mm (kg/m)
77.4
12.5 mm (kg/m)
96.0
Expand
Collapse
Square Dimensions
Hide/Show specific columns Edit
Select columns to display
| Height x Width (mm) | 2.0 mm (kg/m) | 2.5 mm (kg/m) | 3.0 mm (kg/m) | 4.0 mm (kg/m) | 5.0 mm (kg/m) | 6.0 mm (kg/m) | 8.0 mm (kg/m) | 10.0 mm (kg/m) | 12.5 mm (kg/m) |
|---|---|---|---|---|---|---|---|---|---|
| 40 x 40 | 2.31 | 2.82 | 3.30 | 4.20 | — | — | — | — | — |
| 50 x 50 | 2.93 | 3.60 | 4.25 | 5.45 | 6.56 | — | — | — | — |
| 60 x 60 | 3.56 | 4.39 | 5.19 | 6.71 | 8.13 | — | — | — | — |
| 70 x 70 | — | — | 6.13 | 7.97 | 9.70 | — | — | — | — |
| 80 x 80 | — | — | 7.07 | 9.22 | 11.3 | 13.2 | — | — | — |
| 90 x 90 | — | — | 8.01 | 10.5 | 12.8 | 15.1 | — | — | — |
| 100 x 100 | — | — | 8.96 | 11.7 | 14.4 | 17.0 | 21.4 | — | — |
| 120 x 120 | — | — | — | 14.3 | 17.6 | 20.8 | 26.4 | 31.8 | — |
| 140 x 140 | — | — | — | 16.8 | 20.7 | 24.5 | 31.4 | 38.1 | — |
| 150 x 150 | — | — | — | 18.0 | 22.3 | 26.4 | 34.0 | 41.3 | 48.7 |
| 160 x 160 | — | — | — | 19.3 | 23.8 | 28.3 | 36.5 | 44.4 | 52.6 |
| 180 x 180 | — | — | — | — | 27.0 | 32.1 | 41.5 | 50.7 | 60.5 |
| 200 x 200 | — | — | — | — | 30.1 | 35.8 | 46.5 | 57.0 | 68.3 |
| 220 x 220 | — | — | — | — | — | 39.6 | 51.5 | 63.2 | 76.2 |
| 250 x 250 | — | — | — | — | — | 45.2 | 59.1 | 72.7 | 88.0 |
| 300 x 300 | — | — | — | — | — | 54.7 | 71.6 | 88.4 | 108 |
Compare parameters
Select one parameter to compare
Comparison
Height x Width (mm)
40 x 40
2.0 mm (kg/m)
2.31
2.5 mm (kg/m)
2.82
3.0 mm (kg/m)
3.30
4.0 mm (kg/m)
4.20
5.0 mm (kg/m)
—
6.0 mm (kg/m)
—
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
50 x 50
2.0 mm (kg/m)
2.93
2.5 mm (kg/m)
3.60
3.0 mm (kg/m)
4.25
4.0 mm (kg/m)
5.45
5.0 mm (kg/m)
6.56
6.0 mm (kg/m)
—
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
60 x 60
2.0 mm (kg/m)
3.56
2.5 mm (kg/m)
4.39
3.0 mm (kg/m)
5.19
4.0 mm (kg/m)
6.71
5.0 mm (kg/m)
8.13
6.0 mm (kg/m)
—
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
70 x 70
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
6.13
4.0 mm (kg/m)
7.97
5.0 mm (kg/m)
9.70
6.0 mm (kg/m)
—
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
80 x 80
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
7.07
4.0 mm (kg/m)
9.22
5.0 mm (kg/m)
11.3
6.0 mm (kg/m)
13.2
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
90 x 90
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
8.01
4.0 mm (kg/m)
10.5
5.0 mm (kg/m)
12.8
6.0 mm (kg/m)
15.1
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
100 x 100
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
8.96
4.0 mm (kg/m)
11.7
5.0 mm (kg/m)
14.4
6.0 mm (kg/m)
17.0
8.0 mm (kg/m)
21.4
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
120 x 120
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
14.3
5.0 mm (kg/m)
17.6
6.0 mm (kg/m)
20.8
8.0 mm (kg/m)
26.4
10.0 mm (kg/m)
31.8
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
140 x 140
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
16.8
5.0 mm (kg/m)
20.7
6.0 mm (kg/m)
24.5
8.0 mm (kg/m)
31.4
10.0 mm (kg/m)
38.1
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
150 x 150
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
18.0
5.0 mm (kg/m)
22.3
6.0 mm (kg/m)
26.4
8.0 mm (kg/m)
34.0
10.0 mm (kg/m)
41.3
12.5 mm (kg/m)
48.7
Expand
Collapse
Height x Width (mm)
160 x 160
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
19.3
5.0 mm (kg/m)
23.8
6.0 mm (kg/m)
28.3
8.0 mm (kg/m)
36.5
10.0 mm (kg/m)
44.4
12.5 mm (kg/m)
52.6
Expand
Collapse
Height x Width (mm)
180 x 180
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
27.0
6.0 mm (kg/m)
32.1
8.0 mm (kg/m)
41.5
10.0 mm (kg/m)
50.7
12.5 mm (kg/m)
60.5
Expand
Collapse
Height x Width (mm)
200 x 200
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
30.1
6.0 mm (kg/m)
35.8
8.0 mm (kg/m)
46.5
10.0 mm (kg/m)
57.0
12.5 mm (kg/m)
68.3
Expand
Collapse
Height x Width (mm)
220 x 220
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
—
6.0 mm (kg/m)
39.6
8.0 mm (kg/m)
51.5
10.0 mm (kg/m)
63.2
12.5 mm (kg/m)
76.2
Expand
Collapse
Height x Width (mm)
250 x 250
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
—
6.0 mm (kg/m)
45.2
8.0 mm (kg/m)
59.1
10.0 mm (kg/m)
72.7
12.5 mm (kg/m)
88.0
Expand
Collapse
Height x Width (mm)
300 x 300
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
—
6.0 mm (kg/m)
54.7
8.0 mm (kg/m)
71.6
10.0 mm (kg/m)
88.4
12.5 mm (kg/m)
108
Expand
Collapse
Rectangular Dimensions
Hide/Show specific columns Edit
Select columns to display
| Height x Width (mm) | 2.0 mm (kg/m) | 2.5 mm (kg/m) | 3.0 mm (kg/m) | 4.0 mm (kg/m) | 5.0 mm (kg/m) | 6.0 mm (kg/m) | 8.0 mm (kg/m) | 10.0 mm (kg/m) | 12.5 mm (kg/m) |
|---|---|---|---|---|---|---|---|---|---|
| 50 x 30 | 2.31 | 2.82 | 3.30 | 4.20 | — | — | — | — | — |
| 60 x 40 | 2.93 | 3.60 | 4.25 | 5.45 | 6.56 | — | — | — | — |
| 80 x 40 | 3.56 | 4.39 | 5.19 | 6.71 | 8.13 | — | — | — | — |
| 80 x 60 | — | — | 6.13 | 7.97 | 9.70 | — | — | — | — |
| 100 x 40 | — | — | 6.13 | 7.97 | 9.70 | — | — | — | — |
| 100 x 50 | — | — | 6.60 | 8.59 | 10.5 | 12.3 | — | — | — |
| 100 x 60 | — | — | 7.07 | 9.22 | 11.3 | 13.2 | — | — | — |
| 100 x 80 | — | — | 8.01 | 10.5 | 12.8 | 15.1 | — | — | — |
| 120 x 60 | — | — | 8.01 | 10.5 | 12.8 | 15.1 | — | — | — |
| 120 x 80 | — | — | 8.96 | 11.7 | 14.4 | 17.0 | 21.4 | 25.6 | — |
| 140 x 80 | — | — | — | 13.0 | 16.0 | 18.9 | — | — | — |
| 150 x 50 | — | — | — | 11.7 | 14.4 | 17.0 | — | — | — |
| 150 x 100 | — | — | — | 14.9 | 18.3 | 21.7 | 27.7 | 33.4 | — |
| 160 x 70 | — | — | — | 13.6 | 16.8 | 19.8 | 25.2 | — | — |
| 160 x 80 | — | — | — | 14.3 | 17.6 | 20.8 | 26.4 | 31.8 | — |
| 180 x 100 | — | — | — | 16.8 | 20.7 | 24.5 | 31.4 | 38.1 | — |
| 200 x 100 | — | — | — | 18.0 | 22.3 | 26.4 | 34.0 | 41.3 | 48.7 |
| 200 x 120 | — | — | — | — | 23.8 | 28.3 | 36.5 | 44.4 | 52.6 |
| 250 x 100 | — | — | — | — | 26.18 | 31.11 | 40.23 | — | — |
| 250 x 150 | — | — | — | — | 30.1 | 35.8 | 46.5 | 57.0 | 68.3 |
| 260 x 180 | — | — | — | — | — | 39.6 | 51.5 | 63.2 | — |
| 300 x 100 | — | — | — | — | 30.1 | 35.8 | 46.5 | 57.0 | 68.3 |
| 300 x 150 | — | — | — | — | — | 40.5 | 52.8 | 64.8 | 78.1 |
| 300 x 200 | — | — | — | — | — | 45.2 | 59.1 | 72.7 | 88.0 |
| 400 x 200 | — | — | — | — | — | 54.7 | 71.6 | 88.4 | 108 |
Compare parameters
Select one parameter to compare
Comparison
Height x Width (mm)
50 x 30
2.0 mm (kg/m)
2.31
2.5 mm (kg/m)
2.82
3.0 mm (kg/m)
3.30
4.0 mm (kg/m)
4.20
5.0 mm (kg/m)
—
6.0 mm (kg/m)
—
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
60 x 40
2.0 mm (kg/m)
2.93
2.5 mm (kg/m)
3.60
3.0 mm (kg/m)
4.25
4.0 mm (kg/m)
5.45
5.0 mm (kg/m)
6.56
6.0 mm (kg/m)
—
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
80 x 40
2.0 mm (kg/m)
3.56
2.5 mm (kg/m)
4.39
3.0 mm (kg/m)
5.19
4.0 mm (kg/m)
6.71
5.0 mm (kg/m)
8.13
6.0 mm (kg/m)
—
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
80 x 60
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
6.13
4.0 mm (kg/m)
7.97
5.0 mm (kg/m)
9.70
6.0 mm (kg/m)
—
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
100 x 40
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
6.13
4.0 mm (kg/m)
7.97
5.0 mm (kg/m)
9.70
6.0 mm (kg/m)
—
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
100 x 50
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
6.60
4.0 mm (kg/m)
8.59
5.0 mm (kg/m)
10.5
6.0 mm (kg/m)
12.3
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
100 x 60
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
7.07
4.0 mm (kg/m)
9.22
5.0 mm (kg/m)
11.3
6.0 mm (kg/m)
13.2
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
100 x 80
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
8.01
4.0 mm (kg/m)
10.5
5.0 mm (kg/m)
12.8
6.0 mm (kg/m)
15.1
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
120 x 60
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
8.01
4.0 mm (kg/m)
10.5
5.0 mm (kg/m)
12.8
6.0 mm (kg/m)
15.1
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
120 x 80
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
8.96
4.0 mm (kg/m)
11.7
5.0 mm (kg/m)
14.4
6.0 mm (kg/m)
17.0
8.0 mm (kg/m)
21.4
10.0 mm (kg/m)
25.6
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
140 x 80
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
13.0
5.0 mm (kg/m)
16.0
6.0 mm (kg/m)
18.9
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
150 x 50
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
11.7
5.0 mm (kg/m)
14.4
6.0 mm (kg/m)
17.0
8.0 mm (kg/m)
—
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
150 x 100
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
14.9
5.0 mm (kg/m)
18.3
6.0 mm (kg/m)
21.7
8.0 mm (kg/m)
27.7
10.0 mm (kg/m)
33.4
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
160 x 70
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
13.6
5.0 mm (kg/m)
16.8
6.0 mm (kg/m)
19.8
8.0 mm (kg/m)
25.2
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
160 x 80
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
14.3
5.0 mm (kg/m)
17.6
6.0 mm (kg/m)
20.8
8.0 mm (kg/m)
26.4
10.0 mm (kg/m)
31.8
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
180 x 100
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
16.8
5.0 mm (kg/m)
20.7
6.0 mm (kg/m)
24.5
8.0 mm (kg/m)
31.4
10.0 mm (kg/m)
38.1
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
200 x 100
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
18.0
5.0 mm (kg/m)
22.3
6.0 mm (kg/m)
26.4
8.0 mm (kg/m)
34.0
10.0 mm (kg/m)
41.3
12.5 mm (kg/m)
48.7
Expand
Collapse
Height x Width (mm)
200 x 120
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
23.8
6.0 mm (kg/m)
28.3
8.0 mm (kg/m)
36.5
10.0 mm (kg/m)
44.4
12.5 mm (kg/m)
52.6
Expand
Collapse
Height x Width (mm)
250 x 100
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
26.18
6.0 mm (kg/m)
31.11
8.0 mm (kg/m)
40.23
10.0 mm (kg/m)
—
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
250 x 150
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
30.1
6.0 mm (kg/m)
35.8
8.0 mm (kg/m)
46.5
10.0 mm (kg/m)
57.0
12.5 mm (kg/m)
68.3
Expand
Collapse
Height x Width (mm)
260 x 180
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
—
6.0 mm (kg/m)
39.6
8.0 mm (kg/m)
51.5
10.0 mm (kg/m)
63.2
12.5 mm (kg/m)
—
Expand
Collapse
Height x Width (mm)
300 x 100
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
30.1
6.0 mm (kg/m)
35.8
8.0 mm (kg/m)
46.5
10.0 mm (kg/m)
57.0
12.5 mm (kg/m)
68.3
Expand
Collapse
Height x Width (mm)
300 x 150
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
—
6.0 mm (kg/m)
40.5
8.0 mm (kg/m)
52.8
10.0 mm (kg/m)
64.8
12.5 mm (kg/m)
78.1
Expand
Collapse
Height x Width (mm)
300 x 200
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
—
6.0 mm (kg/m)
45.2
8.0 mm (kg/m)
59.1
10.0 mm (kg/m)
72.7
12.5 mm (kg/m)
88.0
Expand
Collapse
Height x Width (mm)
400 x 200
2.0 mm (kg/m)
—
2.5 mm (kg/m)
—
3.0 mm (kg/m)
—
4.0 mm (kg/m)
—
5.0 mm (kg/m)
—
6.0 mm (kg/m)
54.7
8.0 mm (kg/m)
71.6
10.0 mm (kg/m)
88.4
12.5 mm (kg/m)
108
Expand
Collapse
Mechanical Properties
Hide/Show specific columns Edit
Select columns to display
| Thickness (mmin) |
Yield strength Rp0.2 (min MPa) |
Tensile strength Rm (MPa) |
Elongation A5 1) (min %) |
Charpy-V -40°C 10x10 mm test specimen 2) (J) |
|---|---|---|---|---|
| 2.00 - 2.990.0787 - 0.118 | 355 | 510 - 680 | 20 | 27 |
| 3.00 - 12.500.118 - 0.4921 | 355 | 470 - 630 | 20 | 27 |
Compare parameters
Select one parameter to compare
Comparison
Thickness
(mmin)
(mmin)
2.00 - 2.990.0787 - 0.118
Yield strength Rp0.2
(min MPa)
(min MPa)
355
Tensile strength Rm
(MPa)
(MPa)
510 - 680
Elongation A5 1)
(min %)
(min %)
20
Charpy-V -40°C 10x10 mm test specimen 2)
(J)
(J)
27
Expand
Collapse
Thickness
(mmin)
(mmin)
3.00 - 12.500.118 - 0.4921
Yield strength Rp0.2
(min MPa)
(min MPa)
355
Tensile strength Rm
(MPa)
(MPa)
470 - 630
Elongation A5 1)
(min %)
(min %)
20
Charpy-V -40°C 10x10 mm test specimen 2)
(J)
(J)
27
Expand
Collapse
Mechanical properties meet or exceed the requirements of EN 10219.
The mechanical properties for rectangular hollow sections are tested by SSAB on the longer side of the cross section.
1) The hollow sections with D/T < 15 (round) or (B + H)/2T < 12,5 (rectangular and square), the minimum value of elongation is reduced by 2.
2) Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm, SSAB test temperature -40°C . The specified minimum value corresponds to a full-size specimen.
Chemical Composition (ladle analysis)
Hide/Show specific columns Edit
Select columns to display
| C (max %) |
Si (max %) |
Mn (max %) |
P (max %) |
S (max %) |
|---|---|---|---|---|
| 0.16 1) | 0.25 2) | 1.60 | 0.020 1) | 0.012 1) |
Compare parameters
Select one parameter to compare
Comparison
C
(max %)
(max %)
0.16 1)
Si
(max %)
(max %)
0.25 2)
Mn
(max %)
(max %)
1.60
P
(max %)
(max %)
0.020 1)
S
(max %)
(max %)
0.012 1)
Expand
Collapse
Chemical composition meets or exceeds the requirements of EN 10219.
Chemical analyses enables welding in the corner area without restrictions (EN 1993-1-8).
The steel is aluminium-killed.
1) Value exceed the requirements of EN 10219.
2) Si content guaranteed at 0.15–0.25 %.
Carbon Equivalent
Hide/Show specific columns Edit
Select columns to display
| Wall Thickness (mm) | 2.0 - 12.50.079 - 0.492 |
|---|---|
| CEV (max %) | 0.39 |
Compare parameters
Select one parameter to compare
Comparison
Wall Thickness (mm)
CEV (max %)
2.0 - 12.50.079 - 0.492
0.39
CEV value exceeds the requirements of EN 10219.
Tolerances
Tolerance Circular
Hide/Show specific columns Edit
Select columns to display
| Characteristic | Circular hollow sections Tolerances meet or exceed the requirements of EN 10219 |
|---|---|
| Outside diameter (D) 1) | ±1%, with a minimum of ±0.5 mm and a maximum of ±10 mm |
| Out-of-roundness | 2%, when D/T ≤ 100 |
| Thickness (T) | When D ≤ 323.9 mm: -5%/+10%, with a minimum of ±0.2 mm and maximum ±0.5 mm. When 355.6 ≤ D ≤ 406.4 mm : ±10%, when T ≤ 5 mm / ±0.5 mm, when T > 5 mm. When D > 406.4 mm : ±10%, with a maximum of ±2 mm. |
| Straightness | 0.20% of total length and 3 mm over any 1 m length |
| Mass per unit length | Individual tube: ±6% |
| Mill length | 0/+50 mm, 6000 ≤ L ≤ 12000 - 18000 mm (standard lengths 6000 & 12000 mm) |
| Exact length | Agreed at the time of enquiry and order |
Compare parameters
Select one parameter to compare
Comparison
Characteristic
Outside diameter (D) 1)
Circular hollow sections
Tolerances meet or exceed the requirements of EN 10219
Tolerances meet or exceed the requirements of EN 10219
±1%, with a minimum of ±0.5 mm and a maximum of ±10 mm
Characteristic
Out-of-roundness
Circular hollow sections
Tolerances meet or exceed the requirements of EN 10219
Tolerances meet or exceed the requirements of EN 10219
2%, when D/T ≤ 100
Characteristic
Thickness (T)
Circular hollow sections
Tolerances meet or exceed the requirements of EN 10219
Tolerances meet or exceed the requirements of EN 10219
When D ≤ 323.9 mm: -5%/+10%, with a minimum of ±0.2 mm and maximum ±0.5 mm.
When 355.6 ≤ D ≤ 406.4 mm : ±10%, when T ≤ 5 mm / ±0.5 mm, when T > 5 mm.
When D > 406.4 mm : ±10%, with a maximum of ±2 mm.
Characteristic
Straightness
Circular hollow sections
Tolerances meet or exceed the requirements of EN 10219
Tolerances meet or exceed the requirements of EN 10219
0.20% of total length and 3 mm over any 1 m length
Characteristic
Mass per unit length
Circular hollow sections
Tolerances meet or exceed the requirements of EN 10219
Tolerances meet or exceed the requirements of EN 10219
Individual tube: ±6%
Characteristic
Mill length
Circular hollow sections
Tolerances meet or exceed the requirements of EN 10219
Tolerances meet or exceed the requirements of EN 10219
0/+50 mm, 6000 ≤ L ≤ 12000 - 18000 mm (standard lengths 6000 & 12000 mm)
Characteristic
Exact length
Circular hollow sections
Tolerances meet or exceed the requirements of EN 10219
Tolerances meet or exceed the requirements of EN 10219
Agreed at the time of enquiry and order
1) All external dimensions are measured with a minimum distance from the end of the section. The distance must be a minimum of 100 mm.
Tolerance Square
Hide/Show specific columns Edit
Select columns to display
| Characteristic | Square hollow sections Tolerances meet or exceed the requirements of EN 10219 |
|---|---|
| Outside dimensions (B, H) 1) | When B, H < 100 mm ±1 % minimum ±0.5 mm When 100 mm ≤ B, H ≤ 200 mm: ±0.8% When B, H > 200 mm: ±0.6% |
| Thickness (T) | -5%/+10%, with a minimum of ±0.2 mm and maximum ±0.5 mm. |
| External corner profile |
When T ≤ 6 mm: 1.6 x T–2.4 x T When 6 mm < T ≤ 10 mm: 2.0 x T-3.0 x T When T > 10 mm: 2.4 x T–3.6 x T |
| Squareness of side | 90° ±1° |
| Concavity/convexity | 0.8%, with a minimum of 0.5 mm |
| Twist | 2 mm + 0.5 mm/m |
| Straightness | 0.15% of total length and 3 mm over any 1 m length |
| Mass per unit length | Individual tube: ±6% |
| Mill length | 0/+50 mm, 6000 ≤ L ≤ 12000 - 18000 mm (standard lengths 6000 & 12000 mm) |
| Exact length | Agreed at the time of enquiry and order |
Compare parameters
Select one parameter to compare
Comparison
Characteristic
Outside dimensions (B, H) 1)
Square hollow sections
Tolerances meet or exceed the requirements of EN 10219
When B, H < 100 mm ±1 % minimum ±0.5 mm
When 100 mm ≤ B, H ≤ 200 mm: ±0.8%
When B, H > 200 mm: ±0.6%
Characteristic
Thickness (T)
Square hollow sections
Tolerances meet or exceed the requirements of EN 10219
-5%/+10%, with a minimum of ±0.2 mm and maximum ±0.5 mm.
Characteristic
External corner profile
Square hollow sections
Tolerances meet or exceed the requirements of EN 10219
When T ≤ 6 mm: 1.6 x T–2.4 x T
When 6 mm < T ≤ 10 mm: 2.0 x T-3.0 x T
When T > 10 mm: 2.4 x T–3.6 x T
When 6 mm < T ≤ 10 mm: 2.0 x T-3.0 x T
When T > 10 mm: 2.4 x T–3.6 x T
Characteristic
Squareness of side
Square hollow sections
Tolerances meet or exceed the requirements of EN 10219
90° ±1°
Characteristic
Concavity/convexity
Square hollow sections
Tolerances meet or exceed the requirements of EN 10219
0.8%, with a minimum of 0.5 mm
Characteristic
Twist
Square hollow sections
Tolerances meet or exceed the requirements of EN 10219
2 mm + 0.5 mm/m
Characteristic
Straightness
Square hollow sections
Tolerances meet or exceed the requirements of EN 10219
0.15% of total length and 3 mm over any 1 m length
Characteristic
Mass per unit length
Square hollow sections
Tolerances meet or exceed the requirements of EN 10219
Individual tube: ±6%
Characteristic
Mill length
Square hollow sections
Tolerances meet or exceed the requirements of EN 10219
0/+50 mm, 6000 ≤ L ≤ 12000 - 18000 mm (standard lengths 6000 & 12000 mm)
Characteristic
Exact length
Square hollow sections
Tolerances meet or exceed the requirements of EN 10219
Agreed at the time of enquiry and order
1) All external dimensions are measured with a minimum distance from the end of the section. The distance must be a minimum of 100 mm.
Tolerance Rectangular
Hide/Show specific columns Edit
Select columns to display
| Characteristic | Rectangular hollow sections Tolerances meet or exceed the requirements of EN 10219 |
|---|---|
| Outside dimensions (B, H) 1) | When B, H < 100 mm ±1 % minimum ±0.5 mm When 100 mm ≤ B, H ≤ 200 mm: ±0.8% When B, H > 200 mm: ±0.6% |
| Thickness (T) | -5%/+10%, with a minimum of ±0.2 mm and maximum ±0.5 mm. |
| External corner profile |
When T ≤ 6 mm: 1.6 x T–2.4 x T When 6 mm < T ≤ 10 mm: 2.0 x T-3.0 x T When T > 10 mm: 2.4 x T–3.6 x T |
| Squareness of side | 90° ±1° |
| Concavity/convexity | 0.8%, with a minimum of 0.5 mm |
| Twist | 2 mm + 0.5 mm/m |
| Straightness | 0.15% of total length and 3 mm over any 1 m length |
| Mass per unit length | Individual tube: ±6% |
| Mill length | 0/+50 mm, 6000 ≤ L ≤ 12000 - 18000 mm (standard lengths 6000 & 12000 mm) |
| Exact length | Agreed at the time of enquiry and order |
Compare parameters
Select one parameter to compare
Comparison
Characteristic
Outside dimensions (B, H) 1)
Rectangular hollow sections
Tolerances meet or exceed the requirements of EN 10219
When B, H < 100 mm ±1 % minimum ±0.5 mm
When 100 mm ≤ B, H ≤ 200 mm: ±0.8%
When B, H > 200 mm: ±0.6%
Characteristic
Thickness (T)
Rectangular hollow sections
Tolerances meet or exceed the requirements of EN 10219
-5%/+10%, with a minimum of ±0.2 mm and maximum ±0.5 mm.
Characteristic
External corner profile
Rectangular hollow sections
Tolerances meet or exceed the requirements of EN 10219
When T ≤ 6 mm: 1.6 x T–2.4 x T
When 6 mm < T ≤ 10 mm: 2.0 x T-3.0 x T
When T > 10 mm: 2.4 x T–3.6 x T
When 6 mm < T ≤ 10 mm: 2.0 x T-3.0 x T
When T > 10 mm: 2.4 x T–3.6 x T
Characteristic
Squareness of side
Rectangular hollow sections
Tolerances meet or exceed the requirements of EN 10219
90° ±1°
Characteristic
Concavity/convexity
Rectangular hollow sections
Tolerances meet or exceed the requirements of EN 10219
0.8%, with a minimum of 0.5 mm
Characteristic
Twist
Rectangular hollow sections
Tolerances meet or exceed the requirements of EN 10219
2 mm + 0.5 mm/m
Characteristic
Straightness
Rectangular hollow sections
Tolerances meet or exceed the requirements of EN 10219
0.15% of total length and 3 mm over any 1 m length
Characteristic
Mass per unit length
Rectangular hollow sections
Tolerances meet or exceed the requirements of EN 10219
Individual tube: ±6%
Characteristic
Mill length
Rectangular hollow sections
Tolerances meet or exceed the requirements of EN 10219
0/+50 mm, 6000 ≤ L ≤ 12000 - 18000 mm (standard lengths 6000 & 12000 mm)
Characteristic
Exact length
Rectangular hollow sections
Tolerances meet or exceed the requirements of EN 10219
Agreed at the time of enquiry and order
1) All external dimensions are measured with a minimum distance from the end of the section. The distance must be a minimum of 100 mm.